Print this page.Print this Page
Student ID:__________________________ Student Name:_______________________ Adviser Name:_______________________ Catalog: 2016-2017 University Catalog Program: Manufacturing Engineering Technology, Mechatronics Concentration, BS Minimum Credits Required:__________________

Manufacturing Engineering Technology, Mechatronics Concentration, BS

About the Program

This is one of three majors offered for students who seek to contribute at the interface between manufacturing, electrical, mechanical, and computing areas in primarily industrial environments. When you major in mechatronics engineering technology, you will focus on the development of the electromechanical products that are ubiquitous in modern life, dealing with interconnections that allow electronic control of mechanical, pneumatic, and hydraulic systems.

Mechatronics Engineering Technology Website

Degree Requirements and Supplemental Information

The full Program Requirements for 2016-17 Mechatronics Engineering Technology include all Supplemental Information and selective lists of those categories which a student must fulfill in order to earn their degree. These are intended to be printer-friendly, but include less descriptive course detail.

Please see below for program requirements and the necessary degree fulfillments.

PIMFET-BS
MHET
120-cr for graduation
“D-” or better required in all major courses

Departmental/Program Major Courses (120 credits)

Required Major Courses (35 credits)

Course NameTerm TakenGradeGen Ed
MET 10200 - Production Design And Specifications
MET 11100 - Applied Statics
MET 11300 - Mechanics Applications
MET 14400 - Materials And Processes II (MET Gateway Course)
MET 23000 - Fluid Power
MET 24500 - Manufacturing Systems
MET 28400 - Introduction To Industrial Controls
MET 38200 - Controls And Instrumentation For Automation
MFET 34400 - Automated Manufacturing Processes
MFET 37400 - Manufacturing Integration I
  • Manufacturing Selective - Credit Hours: 3.00
    • ENGT 18000 - Engineering Technology Foundations
    ENGT 18100 - Engineering Technology Applications

    Mechatronics Concentration Courses - (24 credits)

    • Mechatronics Selective - Credit Hours: 3.00
    • Controls Elective - Credit Hours: 3.00
    Course NameTerm TakenGradeGen Ed
    ECET 27900 - Embedded Digital Systems
    ECET 32700 - Instrumentation And Data Acquisition Design
    ECET 33700 - Analog Signal Processing
    ECET 43000 - Electrical And Electronic Product And Program Management
    ECET 46000 - Project Design And Development
    CNIT 10500 - Introduction To C Programming

    Other Departmental/Program Course Requirements (57 credits)

    Course NameTerm TakenGradeGen Ed
    COM 11400 - Fundamentals Of Speech Communication (satisfies Oral Communication for core)
    COM 32000 - Small Group Communication
    ENGL 42100 - Technical Writing

     

    IET 45100 - Monetary Analysis For Industrial Decisions or
    TLI 33400 - Economic Analysis For Technology Systems

     

    MA 16010 - Applied Calculus I (satisfies Quantitative Reasoning for core)
    MA 16020 - Applied Calculus II
    ECET 22400 - Electronic Systems
    ECET 38001 - Global Professional Issues In Engineering Technology
    CHM 11100 - General Chemistry
    TECH 12000 - Design Thinking In Technology (satisfies Information Literacy and Science, Technology & Society for core)
  • Science Selective - Credit Hours: 3.00
  • Freshmen Composition Selective (satisfies Written Communication for core) - Credit Hours: 3.00
  • Human Cultures: Humanities Foundation Selective (satisfies Human Cultures Humanities for core) - Credit Hours: 3.00
  • Human Cultures: Behavior/Social Sciences Foundation Selective (satisfies Human Cultures: Behavioral Sciences for core) - Credit Hours: 3.00
  • Humanities/Social Science Elective - Credit Hours: 3.00
  • Technical Elective - Credit Hours: 3.00

    • PHYS Selective - choose from (4 credits)

    (satisfies Science for core)

    Course NameTerm TakenGradeGen Ed
    PHYS 21800 - General Physics
    PHYS 22000 - General Physics
    PHYS 17200 - Modern Mechanics

    CGT Selective - choose from (2 credits)

    Course NameTerm TakenGradeGen Ed
    CGT 11000 - Technical Graphics Communications
    CGT 16300 - Graphical Communication And Spatial Analysis
    IT 10500 - Industrial Technology Introduction To Design

    Statistics/Quality Selective - choose between

    Course NameTerm TakenGradeGen Ed
    STAT 30100 - Elementary Statistical Methods
    IT 34200 - Introduction To Statistical Quality

    Free Electives (4 credits)

    University Core Requirements

    • Human Cultures: Behavioral/Social Sciences
    • Human Cultures: Humanities
    • Information Literacy
    • Oral Communication
    • Quantitative Reasoning
    • Science #1
    • Science #2
    • Science, Technology & Society
    • Written Communication

    Program Requirements

    Accredited by the Engineering Technology Accreditation Commission of ABET, http://www.abet.org

    Fall 1st Year

    Course NameTerm TakenGradeGen Ed
    MET 14400 - Materials And Processes II
    MA 16010 - Applied Calculus I *
    TECH 12000 - Design Thinking In Technology *
  • Freshman Composition Selective - Credit Hours: 3.00 *
    • ENGT 18000 - Engineering Technology Foundations
    ENGT 18100 - Engineering Technology Applications

    16 Credits

    Spring 1st Year

    Course NameTerm TakenGradeGen Ed
    ECET 22400 - Electronic Systems
  • Humanities Foundation Selective - Credit Hours: 3.00 *
    • CNIT 10500 - Introduction To C Programming
    MA 16020 - Applied Calculus II
    MET 11100 - Applied Statics

    15 Credits

    Fall 2nd Year

    Course NameTerm TakenGradeGen Ed
  • Free Elective (ECET 17900 is recommended) - Credit Hours: 3.00
    • CHM 11100 - General Chemistry *
    COM 11400 - Fundamentals Of Speech Communication *
    MET 28400 - Introduction To Industrial Controls
  • Computer Graphics Selective - Credit Hours: 2.00
    • MET 11300 - Mechanics Applications

    15 Credits

    Spring 2nd Year

    Course NameTerm TakenGradeGen Ed
    MET 10200 - Production Design And Specifications
    MET 24500 - Manufacturing Systems
    ECET 27900 - Embedded Digital Systems
  • Physics Selective - Credit Hours: 4.00 *
  • Behavioral/Social Science Foundation Selective - Credit Hours: 3.00 *

    • 16 Credits

    Fall 3rd Year

    Course NameTerm TakenGradeGen Ed
    MET 23000 - Fluid Power
    MFET 34400 - Automated Manufacturing Processes
    ENGL 42100 - Technical Writing
    ECET 33700 - Analog Signal Processing
  • Science Selective - Credit Hours: 3.00 *

    • 15 Credits

    Spring 3rd Year

    Course NameTerm TakenGradeGen Ed
    MFET 37400 - Manufacturing Integration I
    ECET 38001 - Global Professional Issues In Engineering Technology
  • Statistics or Quality Selective - Credit Hours: 3.00
  • Manufacturing Selective - Credit Hours: 3.00
    • ECET 32700 - Instrumentation And Data Acquisition Design

    15 Credits

    Fall 4th Year

    Course NameTerm TakenGradeGen Ed
    ECET 43000 - Electrical And Electronic Product And Program Management
    COM 32000 - Small Group Communication
  • Mechatronics Selective - Credit Hours: 3.00
  • Controls Selective - Credit Hours: 3.00

    •  

    IET 45100 - Monetary Analysis For Industrial Decisions or
    TLI 33400 - Economic Analysis For Technology Systems

    15 Credits

    Spring 4th Year

    Course NameTerm TakenGradeGen Ed
    ECET 46000 - Project Design And Development
  • Technical Selective - Credit Hours: 3.00
  • Humanities/Social Science Elective - Credit Hours: 3.00
    • MET 38200 - Controls And Instrumentation For Automation
  • Free Elective - Credit Hours: 1.00

    • 13 Credits

    Note

    *Fulfills University core.

    1. 120 semester credits and a 2.0 Graduation GPA are required for the Bachelor of Science degree.
    2. Students must earn a “D-” or better in all courses.
    3. Courses at Purdue University may only be attempted a maximum of three (3) times, including W, WF, I, IF and all graded attempts.
    4. 32 credit hours of 300-level or higher courses must be completed at Purdue University.

    Degree Requirements

    The student is ultimately responsible for knowing and completing all degree requirements.

    Degree Works is knowledge source for specific requirements and completion.

    Foreign Language Courses

    Foreign Language proficiency requirements vary by program.  For acceptable languages and proficiency levels, see your advisor:

    American Sign Language, Arabic, Chinese, French, German, (ancient) Greek, Hebrew, Italian, Japanese, Latin, Portuguese, Russian, Spanish

    Critical Course

    The ♦ course is considered critical. A Critical Course is one that a student must be able to pass to persist and succeed in a particular major.

    Notes:





    Print this page.Print this Page